Uplift force
An uplift force is any upward pressure applied to a structure that has the potential to raise it relative to its surroundings. Uplift forces can be a consequence of pressure from the ground below, wind, surface water, and so on.
Water pressure can exert an uplift force on a structure due to high rainfall, for example by causing clay soils to expand. This can be problematic if the upward forces are greater than the forces being exerted downwards by the structure. To overcome this risk, the structure must be appropriately designed to provide greater resistance against uplift forces, and also a drainage system to relieve the water pressure.
For more information, see Ground heave.
All roofs are subject to wind uplift, which will vary according to location, terrain, height, size, shape, exposure and so on. Wind uplift occurs when the air pressure under the roof is greater than the air pressure above it. This can be exacerbated during high wind, as air infiltration into the building can increase pressure below the roof, whilst the speed of wind over the roof surface can reduce air pressure above it, in much the same way it does over an aircraft wing. This can cause damage to the roof if the difference in pressure becomes too great.
'BS EN 1991-1-4:2005+A1:2010 Eurocode 1. Actions on structures. General actions. Wind actions' defines the methodology for calculating likely wind loads which then allow a roofing system to be appropriately designed.
[edit] Related articles on Designing Buildings Wiki
- Bearing capacity.
- Floor loading.
- Ground heave.
- Hurricane design considerations.
- Lateral loads.
- Limit state design.
- Moment.
- Racking.
- Roofing defects.
- Settlement of buildings.
- Subsidence.
- The design of temporary structures and wind adjacent to tall buildings.
- Types of structural load.
- Uniformly Distributed Load.
- Vibrations.
- Wind comfort simulations.
- Wind load.
Featured articles and news
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.
Election fails to spark construction industry revival
Contract awards and planning; post election.
Making diversity and inclusion easy for SMEs
The CIOB tool for companies with limited resources.
Sustainable Futures: Redefining Retrofit for Net Zero Living
BSRIA Briefing 2024, initial speakers announced.
Looking back at the UK's first Passivhaus leisure centre
Reflections on St Sidwell’s Point with CIAT.
A-Level results and electrical apprenticeships
Electrical Skills Index highlights areas with skills shortages.
One of the world's more unusual drive-throughs.
A quick introduction.
Hadrian's Wall Path and the national trails
The trails are heritage assets in their own right.
Articles on timely advice and hydraulic lime.
Building Designers Association of Australia
CIAT and BDAA sign Memorandum of Understanding.
Built Environment Inclusive partners issue statement committed to inclusion.
Building regulation requirements can have unintended consequences.
CIOB announces 2024/25 vice president
Sustainability champion Professor Saul Humphrey.
Accelerating towards a net-zero built environment.